How to Removing windshield Grime With Detailing Clay

Aussie Auto-glass,one of the best leading auto glass replacement company in Sydney, which is located at 813 princes highway in Tempe.

1.Obtain a 3 or 3.5 ounce bar of detailing clay. Detailing clay (or glass cleaning clay) is an elastic compound which can capture grit and grime lodged within a crevice and pull it out. If your car’s windshield has any dings in it, dirt can accumulate within. Even if there are no visible indentations, the fine particulate matter which has accumulated across the surface of your windshield can be removed with detailing clay. Obtain detailing clay at your local auto care shop.

2.Mist the windshield with water. Next, apply an automotive lubricant to the windshield. This liquid combination will help the clay glide across the surface of the windshield. The amount of each you’ll need depends on the size of your vehicle. A bus will require a good deal more water and lubricant that a small car.

3.Grip the detailing clay lengthwise in your hand. Grip it in the manner you would a bar of soap. Keep your middle and index fingers on top of the clay, your thumb on one side and your remaining fingers on the opposite side. Move the detailing clay through the lubricant/water you’ve applied to the windshield. The clay should glide back and forth smoothly across the wet glass.

4.Position the clay on the windshield. Reach over the windshield and place the clay in the center. The clay should be placed in the center bottom of the windshield where it meets the hood.

5.Move the detailing clay across the windshield. Bring the detailing clay from the base of the windshield to the top where it meets the roof. When you’ve completed one vertical line, place the clay at the bottom of the windshield again, but in a location slightly closer to you. Draw a second vertical line up from the windshield to the roof of the vehicle. The second line should be parallel to the first. Continue to drag the clay across the surface of the windshield in straight, vertical lines, moving the rows gradually closer to you.

6.Clean any grit you encounter. When you feel the clay slow or stick in its motion across the windshield, you’ll know it has encountered some grit or grime on the windshield.

7.Move to the other side of the vehicle and repeat the process. Start again by placing the clay on the the bottom center of the windshield. Move the clay up in a straight vertical line toward the roof of the vehicle. After completing a vertical line, bring the clay back down to the base of the windshield. Position it at a point slightly closer to you, but directly next to the location you originally moved the clay from. Continue moving the clay up the length of the windshield in straight vertical lines, gradually bringing the clay closer to you.

8.Wipe the glass clean when finished. Take a microfiber towel in one hand and move it across the windshield in broad, circular motions. This will remove any excess clay which may still be attached. You can choose to use either the same hand or a different hand on the two different halves of the windshield.

9.Maintain your windshield wipers. Regularly inspect your windshield wipers for issues such as corrosion and tearing. The rubber edge should be firmly attached to the blade and free of cracks or holes that can cause streaking. Gently tug the wiper blade to make sure it’s securely installed into the wiper arm. If you see any issues, talk to your mechanic about replacing your windshield wipers.

Aussie Auto-glass, With our highly trained team, we are able to provide you with professional windscreen replacement service and satisfied customer service.