- January 19, 2023
- By feng gao
- In windscreen maintenance, windscreens-tinting
- Tags wind+screen+repair
- 54
- 0
Scratches in windshield can be caused by a variety of things. Car accidents, vandalism, poor parking, and other parking lot mishaps are all common causes for a scratch. While scratches do detract from the appearance of your car, You can try buffing out surface scratches with toothpaste, using a scratch removal product for small scratches.
Method 1 Using Toothpaste for Surface Scratches
1.Run a fingernail over the scratches to see if they are surface or deep. If your fingernail does not catch on the scratches, then they are on the surface and using toothpaste might be a good option. If your fingernail does catch on them, then they are deeper and you will need to use a professional scratch removal product. Aussie Auto-glass(https://ozautoglass.com.au), one of the best leading auto glass replacement company in Sydney, which is located at 813 princes highway in Tempe.
2.Wash and dry the scratched area. Before you apply toothpaste to the scratches, make sure that the area is very clean. Rubbing dirt and debris into the scratched area will make the scratches worse.
•You can take your car to a car wash or wash it yourself.
•To wash your car yourself, spray it with a hose to wet it all over and remove the majority of the dirt and debris. Then, use a large sponge or car-washing brush to apply soap formulated for vehicles to your car. Work the soap into all surface of your car and then use the hose to spray it off. Dry your car with a clean, dry towel.
3.Apply a quarter-sized amount of toothpaste to a dampened microfiber towel. Get the microfiber towel wet enough so that it is just damp. Then, apply a quarter-sized amount of the toothpaste to the towel, or a little more or less depending on the size of the scratch.
•Whitening toothpaste works best, but you can try removing the scratches with any toothpaste you have on hand.
•You will need to apply the toothpaste with a soft, clean, microfiber towel to ensure that rubbing in the toothpaste does not cause more damage.
4.Rub the toothpaste into the scratched area using a circular motion. Push down on the microfiber cloth and move it in small circles to buff out the scratches. Do this until the toothpaste is well-distributed on the surface.
•You will need to apply some pressure as you apply the toothpaste, but not too much.
5.Rinse off any excess toothpaste. After you finish buffing out the scratches, rinse the area thoroughly to remove the excess toothpaste. Spray your car with a hose and then dry the area with a microfiber towel.
•You can also wipe away the excess toothpaste with a wet microfiber towel.
6.Repeat the process up to 2 more times. You may need to do more than 1 application to get rid of surface scratches using toothpaste. Check the area to see if the scratches are still visible and then repeat the process 1 or 2 more times if needed.
•Make sure that you do not do more than 3 applications or you may damage the clear coat of the car’s paint.
Method 2 Using a Scratch Removal Product for Small Scratches
1.Wash your car so there is no dirt or debris left in the scratch. It is important to make sure that the area is completely clean before you apply any product to it or try to buff the area. Any dirt or debris left on the surface when you buff it will result in more scratches.
•Spray your car with a hose before applying any soap to it. Then, use a sponge or brush meant for washing cars to work the soap in. Rinse the soap off completely and dry your car with microfiber towels. Be sure to use soap designed for washing cars.
2.Scrape off stubborn grime with a plastic razor. Only use plastic, since metal razors will likely lead to more scratches on your car’s windshield. Stand beside the car and drag the razor back and forth along the windshield. Continue doing this until the grime is gone, then finish up with a damp microfiber cloth.
3.Cover the edges of the windshield with painter’s tape. You only need to apply the tape around the edges closest to the scratches. This includes the edges of the windshield wipers. The polish will splatter when you work it into the scratches, and anything that gets in between the windshield and the rest of the car is hard to remove.
•Also, consider using the tape to outline the scratches. Place the tape on the inside part of the windshield to keep track of which spots you need to treat.
4.Purchase a scratch-removal product or kit. You can buy scratch-removal products at auto supply stores or in the auto supply section of large one-stop stores. These products are often sold as a scratch-removal kit that includes the scratch-removal solution and a buffing pad to apply the product.
•If you are unsure about what types of scratch removal product to buy, ask a sales associate for help. Aussie Auto-glass(https://ozautoglass.com.au)near you.Employees who work in auto supply stores are usually knowledgeable about these products.
•A microfiber towel is often a good choice for applying scratch removal products since they are gentle on the surface of your car.
•Some products even come with a mechanical buffing tool that you can use to get rid of the scratches.
5.Apply a quarter-sized dollop of scratch-removal product to the pad. You may need a little more or less depending on the size of the scratched area. Squirt the product onto the buffing pad or microfiber cloth, and then fold it in half to work the product around the surface of the pad or cloth.
•Make sure that the product is evenly distributed on the cloth or pad before you begin.
6.Work the product into the scratched area and the surrounding areas. You can work the product in using a circular motion or a back and forth motion. Do what is most comfortable for you and what covers the scratched area best, but do not switch directions! Only go back and forth or in circles. Continue to work in the product for a few minutes so that it is well distributed.
•Make sure to apply light to medium pressure as you work in the product.
7.Wipe away the product residue. After you have finished buffing the scratched area, use a clean microfiber cloth to wipe away the excess product. Buff the surface of the car where you applied the product using a circular motion.
•Do not allow the excess product to dry on the surface of your car.
If the scratches in your car’s paint are deep or excessive, you may want to consider going to a body shop to get them repaired.
Aussie Auto-glass, With our highly trained team, we are able to provide you with professional windscreen replacement service and satisfied customer service.
Book your appointment now and get 10% discount.
And give us google 5 Stars feedback and get a free drink on us.
MAKE APPOINTMENT