How to Polish Aluminum Wheels

Aussie Auto-glass,one of the best leading auto glass replacement company in Sydney, which is located at 813 princes highway in Tempe.

No matter how much dirt and grime is caked in your wheels, they have the potential to shine again. In order to perfectly polish your wheels with a clean finish, you’ll need to clean the wheels, polish them with aluminum polish, and then wax the wheels to protect your hard work and keep the wheels shiny longer.

Cleaning the Wheels

1.Rinse down the wheels and the surrounding areas. Use a hose to spray inside the wheel spokes, on the surface of the wheel, and around the lug nuts. This will loosen up the grime and brake dust that has collected on the wheel, prepping the wheels for treatment. 

•If you have a pressure washer, use this to provide a stronger stream of water.

2.Spray aluminum wheel cleaner over the surface of the wheels.  Spray the cleaner over the surface of the wheels, inside of the spokes, and around the lug nuts.

•If you want to make your own aluminum wheel cleaner at home, you can try combining lemon juice and soda and using this as a cleaner.

•You can also wash the wheel with dawn detergent and water, and then sprinkle on baking soda to scrub. In both of these cases there is an abrasive material (soda or baking soda) which serves to scrub off grime.

3.Agitate the cleaner with a soft-bristled brush, periodically applying water. Scrub the surface of the wheel, inside the spokes and around the lug nuts. You may need special, wheel-specific brushes or a toothbrush to get into hard to reach areas. If the wheel starts to dry, add more water to it as you scrub. Scrubbing a dry wheel might scratch the finish.

•To reach in and scrub inside the spokes, use a cone brush.

•To get around the lug nuts, use a lug nut brush. Both kinds of brushes should be available at mechanic shops.Aussie Auto-glass near you.

4.Scrub down the wheel wells with all-purpose cleaner and a stiff brush. The wheel wells are a prime spot for caked in dirt and grime. Use a stiffer brush in this area, as a soft bristled brush probably won’t do the trick. A long-handled brush can be helpful for reaching into the well.

•A soft-bristled brush is a bad fit for the wheel wells. You need soft bristles on the wheel surfaces and stiff bristles on the wheel wells.

5.Rinse and dry the wheel with a clean cloth to remove leftover dust. Now that you’ve scrubbed away dirt and dust, use the hose to rinse the entirety of the wheel, directing water into the spokes, up to the wheel well, and in the lug nut holes. Let the wheel sit for a few minutes to dry, and use a clean rag to lightly remove residual dust.

Polishing the Aluminum

1.Rub aluminum polish onto a small section of the wheel with a rag. Aluminum polish is an effective way to remove oxidation from aluminum wheels, which aren’t well protected from this kind of damage.Use a clean rag to rub aluminum polish onto the wheel, working in the direction of the grain. Work in small sections so that the polish doesn’t dry before you work it in.

2.Work your way around the wheel with the aluminum polish section by section. Remember, you want to rub polish over small sections at a time to avoid the polish drying before you rub it in. Move deliberately around the wheel, section by section, and keep track of what you have already polished so you don’t end up with an uneven finish. Rub along the grain of the wheel as you go.

3.Use a cloth-wrapped toothbrush to polish hard-to-reach spots. Place a soft cloth around the toothbrush so the bristles don’t mar the finish. Use the toothbrush to reach into the spoke areas and rub on polish where you could not reach on your initial sweep. This will also be useful for polishing around the lug nuts.

4.Wipe the wheel clean with a soft clean towel. Rub with the grain to dry off the wheel and remove the polish, working around the wheel deliberately like before.

•Always use new towels at each step in the process so you’re not rubbing polish or dirt back in when wiping the wheels clean.

Sealing the Wheels with Wax

1.Place a small amount of wax on a clean cloth. Wheel wax helps protect your wheels and make them look cleaner much longer. You can measure a good amount of wax by putting it on your fingertip and then transferring it to the clean cloth.

•You can also protect the aluminum with a metal sealant, which works like wax to protect against oxidation.

A wax or sealant will prevent your aluminum wheels from breaking down and help repel dirt.

2.Rub the wax over the entire surface of the wheel. Rub with the grain of the aluminum, as you did with the aluminum polish. Cover the entire surface of the wheel with wax, reapplying wax to your cloth as necessary.

•Allow the wax to dry fully, usually for about 10-15 minutes. Set a timer so you don’t forget to come back. The wax will seal onto the wheels to provide a protective layer while you wait.

3.Wipe the wax off with a clean, dry cloth after 10-15 minutes. Touch the wax with your finger, and it should feel dry, making it easy to rub off with the rag. Your wheels should look super shiny, and the wax will help keep that polish in for the next week or two.

•You can repeat this process weekly to avoid having to polish your wheels as often. Simply rinse wheels with water, wipe them dry with a clean rag, and then apply the wax.

Tips

•Always take the labels off of polishing cloths before polishing aluminum wheels. This will help you to avoid scratching the aluminum.

•Never use polishes or pastes containing acids, ammonia, or anhydrous chemicals on aluminum wheels. These will age and tarnish your aluminum rims, and possibly even damage them. Many polishes on the market contain these harmful ingredients. Read the label before buying an aluminum polish to be sure these chemicals aren’t included.

•This tutorial is only appropriate if your wheels are in fact aluminum. Check if your wheels are bare aluminum by putting a dab of aluminum polish on a clean cloth and applying this dab to a hidden spot on the wheel (such as the inside of one of the spokes). Look at your rag afterwards, and if it has black on it, your wheels are aluminum. Aluminum oxide creates this black color and shows up on the rag. If your wheels aren’t aluminum, don’t follow the procedures above.

Aussie Auto-glass, With our highly trained team, we are able to provide you with professional windscreen replacement service and satisfied customer service.