How to Make Windshield Washer Fluid

Aussie Auto-glass,one of the best leading auto glass replacement company in Sydney, which is located at 813 princes highway in Tempe.

Windshield washing fluid is an important part of maintaining your car. Most commercial windshield cleaners contain methanol, a poisonous chemical dangerous even in small amounts.Because of methanol’s danger to both health and the environment, some people elect to make their own methanol-free windshield washing fluid at home. Custom washing fluids are also easy to make out of ordinary household ingredients and save money in the long run.

1.Diluting Window Cleaner
Add one gallon of distilled water to a clean, empty container. Pick a container that is easy to pour and holds at least one and a quarter gallons. Always use distilled water to prevent mineral deposits from building up in your car’s spray nozzles and pump.
•Tap water can be used in an emergency. Just remember to replace the fluid as soon as possible to keep from damaging your car.

2.Add one cup of glass cleaner. Pick the commercial glass cleaner of your choice. Make sure to choose a cleaner that produces minimal (preferably no) suds or streaks. This method is good for everyday use, especially during the summer.

3.Mix well by shaking the container and add the solution to your car. If this is your first time making it, test it on your car first. Dab a little solution onto a rag and wipe a corner of the windshield. The ideal cleaner should wipe away dirt without leaving any residue.

4.Combining Dish Soap and Ammonia
Add one gallon of distilled water to a clean jug. Use a funnel if you have difficulty adding the water. The jug should be easy to pour and capable of holding a little over a gallon. Be sure to save the container’s cap for easy mixing and storage.

5.Measure one tablespoon of dish soap and add it to the water. Don’t use too much soap, or your washing fluid may be too thick. Use whatever kind you have on hand. Make sure the soap doesn’t leave behind streaks or residue on glass. If it foams too much, try a different soap. This method is best if you anticipate needing to drive through muddy terrain.

6.Add 1/2 cup ammonia. Use a non-sudsing ammonia that is free from additives and surfactants. Be very careful with this step, as concentrated ammonia can be dangerous. Work in a well-ventilated area and wear gloves. Once the ammonia is well-diluted by the water, it becomes relatively safe for use as a cleaner.

7.Recap the container and shake to mix well. Test your cleaner before using it for the first time. Dab a little onto a clean rag and wipe a corner of your windshield. If your cleaner removes grime without leaving a residue, it’s ready to put in your car.

8.Making Fluid with Vinegar in Cool Weather
Pour 12 cups (3/4 gallon) distilled water into a clean, empty jug. Make sure the container’s capacity is a little more than a gallon. If the rim of the container is narrow, use a funnel to make pouring easier. Label your container with a permanent marker.

9.Add 4 cups white vinegar. Use white vinegar only. Other types of vinegar may leave behind residue or stain your clothing. This is the best type of cleaner for removing pollen.
•Do not use this method in warmer weather. Hot vinegar creates a foul, pungent odor.

10.Mix the solution thoroughly by shaking the container. If the temperatures in your area dip below freezing, do a freeze check before adding the cleaner to your car. Leave a small cup of the solution outside overnight and check in the morning. If it has frozen, add another two cups of vinegar to the jug and try again. If it still freezes, add one cup of rubbing alcohol and check again.

Aussie Auto-glass, With our highly trained team, we are able to provide you with professional windscreen replacement service and satisfied customer service.