It’s important to know how to clean your windshield

1.Cleaning a Glass Windshield With Your Wipers
Locate your windshield wiper lever. The windshield wiper lever is a long lever, straight or angled, located to the right of the steering column. If you have trouble locating your wiper lever, consult your vehicle maintenance guide or contact the vehicle’s manufacturer.

2.Pull the windshield wiper lever toward you. When you pull the windshield wiper straight back and away from the steering column, two parallel streams of windshield wiper fluid should eject onto the windshield. If your windshield wiper fluid does not come out when you pull the windshield wiper lever, or if it only comes out in a weak stream, check the level by opening your hood and locating the wiper fluid tank. Refill it if necessary.
If your windshield wipers do not work, bring your automobile to your local car repair shop and get them fitted with new wipers. You could also try to find the right windshield wipers yourself, but make sure to check your vehicle’s maintenance guide beforehand so you get the right length.

3.Rub the cloth up and down the rubber blade to clean it. Brace the wiper to keep it from moving with your nondominant hand. Take your cloth and wrap it around the rubber or silicone wiper blade on the underside of the wiper. Slide the cloth up and down the entire length of the wiper blade to pull the gunk, dirt, and dust off of the wiper.
•It doesn’t take much pressure to clean the blades. Just running the cloth along the rubber or silicone is usually enough to remove all of the debris on it.
•If you use white vinegar, keep the cloth or towel off of the body of the vehicle. Some paint jobs may be damaged by vinegar.

4.Continue wiping the blade down until the cloth is clean after you wipe it. After wiping the blade 4-5 times, flip the cloth over to a clean section and wipe the blade again. If it’s clean, you’re all done! If it’s dirty, reload your cloth with more water, vinegar, or alcohol, and continue wiping the blade down until the cloth looks clean after wiping it.
•Repeat this process on your other wiper blade.
•Put the key back in the ignition and turn the electrical on let your wipers back down to their original position if that’s how you started this process.

5.Wash the hinge area with warm soapy water if the wipers start sticking. If your windshield wipers tend to stick or stutter when they’re on, your hinges may be dirty. Load a sponge up with soap and water. Then, gently wipe around the hinges where your wipers connect to the brackets on the windshield. Repeat this process as needed until your wipers move smoothly whenever you turn them on.
•Rinse the brackets off with clean water when you’re done to keep soap residue from drying out on the brackets.
•If your wipers still stutter, there may be something stuck under the joint where the bracket connects to the wiper. You can blow some compressed air on the joint to try to clean it out if this is the case.

6.Release the windshield wiper lever. When you think the windshield has received enough wiper fluid and has been scrubbed adequately by the windshield wipers, release the lever to stop the cleaning process. If your windshield wiper fluid leaves streaks or smears behind, consider refilling it with a different variety after exhausting the current supply. Alternately, you might consider investing in a new pair of wipers. Consult the staff at your local auto care shop for advice pertaining to your vehicle.
•Windshield wiper blades should be changed regularly every 2 to 3 years.
•If there is some buildup on the wiper blade itself, try wiping the blade down with rubbing alcohol or mineral spirits.

Aussie Auto-glass(https://ozautoglass.com.au), one of the best leading auto glass replacement company in Sydney, which is located at 813 princes highway in Tempe. With our highly trained team, we are able to provide you with professional windscreen replacement service and satisfied customer service.