Car Glass Tinting Film:What You Need to Know

Tinting your car windows is a sure fire way to give it new look, but it can be a tricky affair to get right. So how difficult is it to apply window tinting, and is it worth the hassle? Read on and we will tell you all you need to know about window tinting.

1.Washing the car.Clean the glass thoroughly with glass cleaner and a scrub sponge.  It’s imperative the glass be completely clean because dirt and dust will cause the tinting film to bubble.  Dry with a squeegee and a low-lint cloth.  Wipe down the gaskets and clean as far into the gap between the gasket and the glass as possible.

2 .Extend the film over the window. Roll it out with the liner side facing outward.  Use a utility tool with a new blade to cut away the excess glass tinting film.  Position the film so that the bottom edge extends from a ¼ or ½ inch below the top of the inside car window seal.

3.The window film has an adhesive layer that is protected by a clear liner. We remove the liner and wet the adhesive with our soapy water solution. Then we squeegee the product on the glass. The water allows the film to be applied to the glass without any air pockets. Once the moisture is dry, the adhesive is cured directly to the window.

4. Generously spray the inside of the window with the soapy solution.    Carefully lift the film from the outside of the glass and place the wet adhesive against the wet glass on the inside of the car. Use your hands to smooth out any wrinkles and position the film on the window.

5. With short strokes, work from one side of the window to the other, applying pressure in a downward motion until all of the water is pushed out from under the tinted film. Push any bubbles you find to the nearest edge until the film lies flat.

6. To finish, wrap the low-lint cloth around the hard edge of the squeegee and firmly dry the window using downward strokes.  Wipe up any excess solution on and around the window and the interior surfaces of the car. Be careful,Avoid rolling down the windows for three days following car glass tinting film.This will give the film ample time to adequately adhere in place.

Aussie Auto-glass(https://ozautoglass.com.au), one of the best leading auto glass replacement company in Sydney, which is located at 813 princes highway in Tempe. With our highly trained team, we are able to provide you with professional windscreen replacement service and satisfied customer service.